Dhcp Server Ping Packets; Dhcp Server Ping Timeout - H3C MSR 20-20 Command Reference Manual

View
Parameter
Description
Related command:
Example

dhcp server ping packets

Syntax
View
Parameter
Description
Example

dhcp server ping timeout

Syntax
System view
pool-name: Global address pool name, which is a unique pool identifier, a string of
1 to 35 characters.
Use the
dhcp server ip-pool
its view. If the pool was created, you will directly enter its view.
Use the undo dhcp server ip-pool
address pool.
By default, no DHCP address pool is created.
dhcp enable.
# Create the DHCP address pool identified by 0.
<Sysname> system-view
[Sysname] dhcp server ip-pool 0
[Sysname-dhcp-pool-0]
dhcp server ping packets number
undo dhcp server ping packets
System view
number: Number of ping packets, in the range of 0 to 10. If the ping timeout time
is set to 0, the DHCP server will not perform any ping collision detection.
Use the
dhcp server ping packets
of ping packets on the DHCP server.
Use the
undo dhcp server ping packets
The number defaults to 1.
# Specify the maximum number of ping packets as 1.
<Sysname> system-view
[Sysname] dhcp server ping packets 10
dhcp server ping timeout milliseconds
undo dhcp server ping timeout
command to create a DHCP address pool and enter
command to remove specified DHCP
command to specify the maximum number
command to restore the default.
709