Dhcp Server Configuration Commands; Bims-Server - H3C MSR 20-20 Command Reference Manual

51

bims-server

Syntax
View
Parameter
Description
Related commands:
Example
DHCP S
C
OMMANDS
n
The DHCP server configuration is supported only on Layer 3 Ethernet interfaces
■
(or subinterfaces), virtual Ethernet interfaces, VLAN interfaces, serial interfaces,
and loopback interfaces. The subaddress pool configuration is not supported
on serial and loopback interfaces.
DHCP Snooping must be disabled on the DHCP server.
■
bims-server ip ip-address [ port port-number ] sharekey key
undo bims-server
DHCP address pool view
ip ip-address: Specifies the IP address of a BIMS server.
port port-number: Specifies a port number for the BIMS server in the range 1 to
65534.
sharekey key: Specifies a shared key for the BIMS server, which is a string of 1 to
16 characters.
Use the
bims-server
shared key of a BIMS server in the DHCP address pool for the client.
Use the
undo bims-server
information from the DHCP address pool.
By default, the related information of the BIMS server is not specified.
If you execute the bims-server command repeatedly, the latest configuration will
overwrite the previous one.
dhcp server ip-pool.
# Specify the IP address 1.1.1.1, port number 80, shared key aabbcc of the BIMS
server in DHCP address pool 0 for the client.
<Sysname> system-view
[Sysname] dhcp server ip-pool 0
[Sysname-dhcp-pool-0] bims-server ip 1.1.1.1 port 80 sharekey aabbcc
C
ERVER ONFIGURATION
command to specify the IP address, port number, and
command to remove specified BIMS server