Dhcp Relay Server-Detect; Dhcp Relay Server-Group - H3C MSR 20-20 Command Reference Manual

734 C 52: DHCP R
HAPTER
Example

dhcp relay server-detect

Syntax
View
Parameter
Description
Example

dhcp relay server-group

Syntax
View
Parameter
Description
A C C
ELAY GENT ONFIGURATION
Use the undo dhcp relay security tracker
interval.
The default handshake interval is auto, the value of 60 seconds divided by the
number of binding entries.
# Set the handshake interval as 100 seconds.
<Sysname> system-view
[Sysname] dhcp relay security tracker 100
dhcp relay server-detect
undo dhcp relay server-detect
System view
None
Use the
dhcp relay server-detect
detection.
Use the undo dhcp relay server-detect
server detection.
By default, pseudo DHCP server detection is disabled.
# Enable pseudo DHCP server detection.
<Sysname> system-view
[Sysname] dhcp relay server-detect
dhcp relay server-group group- ip ip-address
undo dhcp relay server-group group-id [ ip ip-address ]
System view
group-id: Specifies a DHCP server group number, in the range of 0 to 19.
ip ip-address: Specifies a DHCP server IP address.
Use the dhcp relay server-group
DHCP server group.
OMMANDS
command to enable pseudo DHCP server
command to specify a DHCP server for a
command to restore the default
command to disable pseudo DHCP