Show Ipsec Key Pubkey-Chain Rsa - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

show ipsec key pubkey-chain rsa

Syntax
Release Information
Description
Options
Mode
890
show ipsec key pubkey-chain rsa { summary | address ipAddress |
name identityString } [ filter ]
Command introduced in JunosE Release 7.1.0.
Displays the ISAKMP/IKE public key that a remote peer uses for RSA authentication
without the need for a digital certificate.
summary—Displays a brief summary of the remote peers for which peer public keys
are configured on the router
ipAddress—IP address of the peer for which the public key can be used, in 32-bit dotted
decimal format (for example, 192.168.32.2)
identityString—Identity of the remote peer for which the public key can be used, either
in fully qualified domain name (FQDN) format (for example,
group003.customer535.isp.net) or in FQDN format preceded by an optional user@
specification (for example, tsmith@group003.customer535.isp.net); maximum of 80
characters
filter—See Filtering show Commands on page 4
Privileged Exec
Copyright © 2010, Juniper Networks, Inc.