Ipsec Ike-Policy-Rule - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

ipsec ike-policy-rule

Syntax
Release Information
Description
Options
Mode
994
ipsec ike-policy-rule priority
no ipsec ike-policy-rule [ priority ]
Command introduced before JunosE Release 7.1.0.
Defines and prioritizes an ISAKMP/IKE policy. ISAKMP/IKE policies define parameters to
be used during ISAKMP/IKE negotiation. You can have up to 10 ISAKMP/IKE policies per
router. The no version removes a policy. If you do not include a priority number with the
no version, the software removes all ISAKMP/IKE policies.
NOTE: This command is replacing the ipsec isakmp-policy-rule command.
The ipsec isakmp-policy-rule command may be removed completely in a
future release.
priority—Identifies and prioritizes the ISAKMP/IKE policy; in the range 1 to 10000, with
1 having the highest priority
Global Configuration
Copyright © 2010, Juniper Networks, Inc.