Ipsec Ike-Policy-Rule - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual
Software for e series broadband services routers command reference a to m
Hide thumbs
Also See for JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010:
- Manual (282 pages)
Table of Contents
Advertisement
JunosE 11.2.x Command Reference Guide A to M
ipsec ike-policy-rule
Syntax
Release Information
Description
Options
Mode
992
ipsec ike-policy-rule priority
no ipsec ike-policy-rule [ priority ]
Command introduced before JunosE Release 7.1.0.
Defines and prioritizes an ISAKMP/IKE policy. ISAKMP/IKE policies define parameters to
be used during ISAKMP/IKE negotiation. You can have up to 10 ISAKMP/IKE policies per
router. The no version removes a policy. If you do not include a priority number with the
no version, the software removes all ISAKMP/IKE policies.
NOTE: This command is replacing the ipsec isakmp-policy-rule command. The ipsec
isakmp-policy-rule command may be removed completely in a future release.
priority—Identifies and prioritizes the ISAKMP/IKE policy; in the range 1 to 10000, with
1 having the highest priority
Global Configuration
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
Need help?
Do you have a question about the JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 and is the answer not in the manual?
Questions and answers