Ipv6 Netstream Export Rate; Ipv6 Netstream Export Source - H3C SR6600 Command Reference Manual

ipv6 netstream export rate

Use ipv6 netstream export rate to configure the limit on the IPv6 NetStream data export.
Use undo ipv6 netstream export rate to remove the IPv6 NetStream data export limit.
Syntax
ipv6 netstream export rate rate
undo ipv6 netstream export rate
Default
The export rate of IPv6 NetStream data is not limited.
Views
System view
Default command level
3: Manage level
Parameters
rate: Specifies the maximum rate for exporting IPv6 NetStream data, in the unit of the maximum number
of packets per second, in the range of 1 to 1000.
Usage guidelines
The export rate limit applies to each card. As the aging timer is different, the configuration may not be
very accurate on a multi-CPU device.
Examples
# Allow 10 packets at most to be exported per second.
<Sysname> system-view
[Sysname] ipv6 netstream export rate 10

ipv6 netstream export source

Use ipv6 netstream export source to configure the source interface for IPv6 NetStream data export.
Use undo ipv6 netstream export source to remove the configuration.
Syntax
ipv6 netstream export source interface interface-type interface-number
undo ipv6 netstream export source
Default
The interface connecting to the NetStream server, where the IPv6 NetStream data is sent out, is used as
the source interface.
Views
System view, NetStream aggregation view
Default command level
3: Manage level
Parameters
196