Peer Request-Sa-Enable; Peer Sa-Cache-Maximum - H3C S3600 Series Command Manual

Command Manual – Multicast
H3C S3600 Series Ethernet Switches-Release 1510
[H3C-msdp] peer 110.10.10.1 minimum-ttl 10

7.1.14 peer request-sa-enable

Syntax
peer peer-address request-sa-enable
undo peer peer-address request-sa-enable
View
MSDP view
Parameter
peer-address: IP address of the MSDP peer.
Description
Use the peer request-sa-enable command to enable the router to send an SA request
message to the specified MSDP peer upon receipt of a Join message.
Use the undo peer request-sa-enable command to remove the configuration.
By default, upon receipt of a Join message, the router sends no SA request message to
the MSDP peer but waits for the next SA message.
Related command: cache-sa-enable.
Example
# Configure to send an SA request message to the MSDP peer 125.10.7.6.
<H3C> system-view
System View: return to User View with Ctrl+Z.
[H3C] msdp
[H3C-msdp] peer 125.10.7.6 request-sa-enable

7.1.15 peer sa-cache-maximum

Syntax
peer peer-address sa-cache-maximum sa-limit
undo peer peer-address sa-cache-maximum
View
MSDP view
Parameter
peer-address: IP address of the MSDP peer.
Chapter 7 MSDP Configuration Commands
7-13