(For more information about the history-command max-size command, see Logging In to the
Device in the Fundamentals Command Reference.
Configuring the History Buffer Size
Follow these steps to configure the history buffer size:
To do...
Enter system view
Enter user interface view
Set the maximum number of
commands that can be saved in
the history buffer
For more information about the user-interface and history-command max-size commands, see
Logging In to the Device in the Fundamentals Command Reference.
Controlling CLI Display
Multi-Screen Display
Controlling multi-screen display
If the output information spans multiple screens, each screen pauses after displayed. Then, you can
perform one of the following operations to proceed.
Action
Press Space
Press Enter
Press Ctrl+C
Press <PageUp>
Press <PageDown>
By default, each screen displays up to 24 lines. To change the maximum number of lines displayed on
the next screen, use the screen-length command. For more information about the screen-length
command, see Logging In to the Device in the Fundamentals Command Reference.
Disabling multi-screen display
You can use the following command to disable the multi-screen display function. Then, all the output
information is displayed at one time and the screen is refreshed continuously until the last screen is
displayed.
Use the command...
system-view
user-interface { first-num1
[ last-num1 ] | { aux | console | tty |
vty } first-num2 [ last-num2 ] }
history-command max-size
size-value
Displays the next screen.
Displays the next line.
Stops the display and the command execution.
Displays the previous page.
Displays the next page.
1-11
Remarks
—
—
Optional
By default, the history buffer can
save up to 10 commands.
Function