Display Msdp Sa-Count - H3C S7500E Series Command Manual

Hide thumbs Also See for S7500E Series:

Table of Contents

Command Manual – Multicast

H3C S7500E Series Ethernet Switches

Table 5-3 Description on the fields of the display msdp sa-cache command

(Source, Group)

5.1.5 display msdp sa-count

display msdp sa-count [ as-number ]

as-number: AS number, in the range of 1 to 65535.

Use the display msdp sa-count command to view the number of SA messages in the

This command gives the corresponding output only after the cache-sa-enable

command is executed.

Related commands: cache-sa-enable.

# View the number of SA messages in the MSDP cache.

<Sysname> display msdp sa-count

Number of cached Source-Active entries, counted by Peer

Peer's Address

(S, G) entry: (source address, group address)

Address of the RP that generated the (S, G) entry

Type of protocol from which the AS number is

originated. "?" indicates that the system was unable to

obtain the protocol type.

AS number of the origin RP. "?" indicates that the

system was unable to obtain the AS number.

Length of time for which the cached (S, G) entry has

been existing, in hours:minutes:seconds

Length of time in which the cached (S, G) entry will

expire, in hours:minutes:seconds

Number of SA

Chapter 5 MSDP Configuration Commands

Table of Contents