Probe Count - H3C SR6600 Command Reference Manual

password: Specifies the password used to log in to the FTP server. This argument is case sensitive. If
simple is specified, it must be a plaintext string of 1 to 32 characters. If cipher is specified, it must be a
ciphertext string of 1 to 73 characters. If neither cipher nor simple is specified, you set a plaintext
password.
Usage guidelines
For secrecy, all keys, including keys configured in plain text, are saved in cipher text.
Examples
# Configure the password used for logging in to the FTP server as ftpuser.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type ftp
[Sysname-nqa-admin-test-ftp] password simple ftpuser
Related commands
• username
operation
•

probe count

Use probe count to specify the probe times.
Use undo probe count to restore the default.
Syntax
probe count times
undo probe count
Default
An operation performs one probe.
Views
DHCP operation view, DNS operation view, DLSw operation view, FTP operation view, HTTP operation
view, ICMP echo operation view, SNMP operation view, TCP operation view, UDP echo operation view,
UDP jitter operation view
Default command level
2: System level
Parameters
times: Specifies the probe times, in the range of 1 to 15.
Usage guidelines
The following describes how different NQA operation types operate:
A TCP or DLSw operation sets up a connection.
•
A UDP jitter or a voice operation sends a specific number of probe packets. The number of probe
•
packets is configurable with the probe packet-number command.
• An FTP, HTTP, DHCP, or DNS operation uploads or downloads a file, gets a web page, gets an IP
address through DHCP, or translates a domain name to an IP address.
An ICMP echo or UDP echo operation sends an ICMP echo request or a UDP packet.
•
41