System-View - H3C S7500 Series Command Manual

Command Manual – System Maintenance and Debugging
H3C S7500 Series Ethernet Switches
Parameters
sysname: System name of the Ethernet switch. It is a character string in length of 1 to
30 characters. By default, it is H3C.
Description
Use the sysname command to set the system name of the Ethernet switch. Changing
the system name will affect the CLI prompt. For example, if the system name of the
switch is H3C, the prompt for user view is <H3C>.
Use the undo sysname command to restore the default system view of the Ethernet
switch.
Examples
# Set the system name of the Ethernet switch to H3CLANSwitch.
<H3C> system-view
System View: return to User View with Ctrl+Z.
[H3C] sysname H3CLANSwitch
[H3CLANSwitch]

1.1.8 system-view

Syntax
system-view
View
User view
Parameters
None
Description
Use the system-view command to enter system view from user view.
Related commands: quit and return.
Examples
# Enter system view from user view.
<H3C> system-view
System View: return to User View with Ctrl+Z.
[H3C]
Chapter 1 Basic System Configuration
1-6
and Debugging Commands