Operation Manual – System Maintenance and Debugging
H3C S3610&S5510 Series Ethernet Switches
1.2 Basic Configurations
This section covers the following topics:
Entering/Exiting System View
Switch CLI Language Mode
Configuring Device Name
Configuring System Clock
Configuring Welcome Information
Configuring CLI Hotkeys
Configuring User Levels and Command Levels
Displaying System Configuration Information and Running Information
Displaying System Statistics
1.2.1 Entering/Exiting System View
You will enter user view automatically after you log into the device. And a prompt
<Sysname> will be displayed on the screen.
Table 1-6 Follow these steps to enter/exit system view
Enter system view from
user view
Return to user view from
system view
Note:
With the quit command, you can return to the previous view or exit the system from
user view. The hot key <Ctrl+Z> is equivalent to the return command.
1.2.2 Switch CLI Language Mode
The device supports two CLI language modes, English and Chinese. You can switch
the CLI language mode as needed.
To do...
Use the command...
system-view
quit
You
automatically after logging
onto the device.
—
1-13
Chapter 1 Basic Configurations
Remarks
enter
user
view