Mac-Address Static - H3C CR16000-F Command Reference Manual

Views
System view
Predefined user roles
network-admin
Parameters
interval : Specifies an interval value in the range of 30 to 65535 seconds.
Usage guidelines
As a best practice, set the VXLAN statistics collection interval to a value smaller than 3600 seconds
(1 hour).
Examples
# Set the VXLAN statistics collection interval to 30 seconds.
<Sysname> system-view
[Sysname] l2vpn statistics interval 30

mac-address static

Use mac-address static to add a static remote-MAC address entry for a VXLAN VSI.
Use undo mac-address static to remove a static remote-MAC address entry for a VXLAN VSI.
Syntax
mac-address
vsi-name
undo mac-address static [ mac-address ] [ interface tunnel tunnel-number ]
vsi vsi-name
Default
VXLAN VSIs do not have static remote-MAC address entries.
Views
System view
Predefined user roles
network-admin
Parameters
mac - address : Specifies a remote MAC address in H-H-H format. Do not specify a multicast MAC
address or an all-zeros MAC address. You can omit the consecutive zeros at the beginning of each
segment. For example, you can enter f-e2-1 for 000f-00e2-0001.
interface tunnel tunnel-number : Specifies the VXLAN tunnel interface for the remote MAC
address. The tunnel-number argument represents the tunnel interface number. The tunnel
interface must already exist.
vsi vsi-name : Specifies the VSI name, a case-sensitive string of 1 to 31 characters.
Usage guidelines
A remote MAC address is the MAC address of a VM in a remote site.
Remote MAC entries can be generated by the following methods:
•
Manual creation.
•
Dynamic learning.
static mac-address interface tunnel tunnel-number vsi
20