Display Ripng Interface - H3C S7500E Series Command Manual

Command Manual – IPv6 Routing
H3C S7500E Series Ethernet Switches
Table 2-2 Description on fields of the display ripng database command
2001:7B::2:2A1:5DE/64
via
cost
Imported

2.1.5 display ripng interface

Syntax
display ripng process-id interface [ interface-type interface-number ]
View
Any view
Parameters
process-id: RIPng process ID, in the range of 1 to 65535.
interface-type interface-number: Specified an interface.
Description
Use the display ripng interface command to display the interface information of the
RIPng process.
If no interface is specified, information about all interfaces of the RIPng process will be
displayed.
Examples
# Display the interface information of RIPng process 1.
<Sysname> display ripng 1 interface
Interface-name: Vlan-interface 100
Field
Link Local Address: FE80::200:5EFF:FE19:3E00
Split-horizon: on
MetricIn: 0
Default route: off
Chapter 2 IPv6 RIPng Configuration
Description
IPv6 destination address/prefix length
Next hop IPv6 address
Route metric value
Routes learnt from other routing protocols
Poison-reverse: off
MetricOut: 1
2-5
Commands