Show Ipsec Option - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

show ipsec option

Syntax
Release Information
Description
Mode
Copyright © 2010, Juniper Networks, Inc.
show ipsec option
Command introduced before JunosE Release 7.1.0.
Displays the dead peer detection (DPD), Network Address Translation Traversal (NAT-T)
status (enabled or disabled), and invalid cookie transmission status (enabled or disabled)
for the current virtual router.
Privileged Exec, User Exec
Chapter 7: S Commands
893