Snmp-Agent Trap Enable Posa - H3C MSR Series Manual

Views
User view
Predefined user roles
network-admin
Parameters
app-id: Specifies a POS application template by its ID, in the range of 1 to 31.
terminal-id: Specifies a POS terminal template by its ID, in the range of 1 to 255.
Usage guidelines
This command clears the statistics that are displayed with the display posa statistics app and display
posa statistics terminal commands. The statistics counters restart at 0.
When you use this command to clear statistics for an application template or terminal template that does
not exist, the router does not display an error message.
Examples
# Clear all statistics.
<Sysname> reset posa statistics
Related commands
display posa statistics app
•
• display posa statistics terminal

snmp-agent trap enable posa

Use snmp-agent trap enable posa to enable SNMP notifications for POS terminal access.
Use undo snmp-agent trap enable posa to disable SNMP notifications for POS terminal access.
Syntax
snmp-agent trap enable posa [ app-state-change | server-state-change | terminal-hangup ] *
undo snmp-agent trap enable posa [ app-state-change | server-state-change | terminal-hangup ] *
Default
SNMP notifications for POS terminal access are enabled.
Views
System view
Predefined user roles
network-admin
Parameters
app-state-change: Enables notifications for POS application template state changes.
server-state-change: Enables notifications for POS access server state changes.
terminal-hangup: Enables notifications for POS terminal hangups.
20