Display Pki Certificate; Crl Url - H3C MSR 20-20 Command Reference Manual

2050 C 134: PKI C
HAPTER
Example

crl url

Syntax
View
Parameter
Description
Example

display pki certificate

Syntax
View
Parameter
Description
C
ONFIGURATION OMMANDS
# Set the CRL update period to 20 hours.
<Sysname> system-view
[Sysname] pki domain 1
[Sysname-pki-domain-1] crl update-period 20
crl url url-string
undo crl url
PKI domain view
url-string: URL of the CRL distribution point, a case-insensitive string of 1 to 127
characters in the format of ldap: //server_location, where server_location is
generally expressed by IP address.
Use the command to specify the URL of the CRL distribution point.
crl url
Use the
undo crl url
By default, no CRL distribution point URL is specified.
Note that when the URL of the CRL distribution point is not set, you should
acquire CA certificate and a local certificate, and then acquire a CRL through SCEP.
# Specify the URL of the CRL distribution point.
<Sysname> system-view
[Sysname] pki domain 1
[Sysname-pki-domain-1] crl url ldap://169.254.0 30
display pki certificate { { ca | local } domain domain-name | request-status }
Any view
ca: Displays the CA certificate.
local: Displays the local certificate.
domain-name: Name of the PKI domain, a string of 1 to 15 characters.
request-status: Displays the status of a certificate request.
Use the display pki certificate
or the status of certificate request.
command to remove the configuration.
command to display the contents of a certificate