Display Nat Server; Display Nat Session - H3C MSR 20-20 Command Reference Manual

display nat server

Syntax
View
Parameter
Description
Example

display nat session

Syntax
View
Parameter
Description
display nat server
Any view
None
Use the display nat server
servers.
# Display information about internal servers.
<Sysname> display nat server
Server in private network information:
There are currently 1 internal server(s)
Interface: Ethernet1/0, Protocol: 6(tcp),
[global] 202.110.10.10:
Table 529 Description on the fields of the display nat server command
Field
Server in private network information
Interface:Ethernet1/0, Protocol:6(tcp),
[global] 202.110.10.10: 8080 [local]
10.110.10.10: 80(www)
display nat session [ vpn-instance vpn-instance-name ] [ source { global
global-address | inside inside-address } ] [ destination dst-address ]
Any view
vpn-instance vpn-instance-name: Displays NAT translation table entries in the
specified MPLS VPN instance. The vpn-instance-name is a string of 1 to 31
characters.
source global global-address: Displays NAT translation table entries for the
specified external source IP address.
source inside inside-address: Displays NAT translation table entries for the
specified internal source IP address.
destination dst-address: Displays NAT translation table entries for the specified
destination IP address.
Use the display nat session
command to display information about internal
8080 [local]
Description
Information about internal servers
On interface Ethernet 1/0, a WWW server
is configured. Its internal address and port
number are 10.110.10.10 and 80,
respectively. Its external address and port
number are 202.110.10.10 and 8080,
respectively. The protocol type is TCP.
command to display the active NAT sessions.
2025
10.110.10.10: 80(www)