Display Nat Address-Group - H3C MSR 20-20 Command Reference Manual

Example

display nat address-group

Syntax
View
Parameter
Description
Example
# Display connection-limit statistics.
<Sysname> display connection-limit statistics
source-ip
192.168.0.210
--------------------------------------------------------------------------
NAT amount
2
source-ip
192.168.0.210
--------------------------------------------------------------------------
NAT amount
2
Table 522 Description on the fields of the display connection-limit statistics command
Field Description
source-ip Source IP address
dest-ip Destination IP address
dest-port Destination port number
vpn-instance Name of the MPLS VPN instance that a connection belongs to
amount Number of connections allowed to establish
upper-limit Upper limit of connections
lower-limit Lower limit of connections
limit-flag Whether new connections are allowed, 0 means yes, 1 means no
display nat address-group
Any view
None
Use the display nat address-group
information.
# Display the NAT address pool information.
<Sysname> display nat address-group
NAT address-group information:
There are currently 1 nat address-group(s)
1 : from
Table 523 Description on the fields of the display nat address-group command
Field
NAT address-group information
There are currently 1 nat address-group(s)
1 : from 202.110.10.10 to 202.110.10.15
dest-ip dest-port
--- ---
upper-limit lower-limit
200 100
dest-ip dest-port
--- ---
upper-limit lower-limit
50 20
command to display the NAT address pool
202.110.10.10
Description
NAT address pool information
There is one NAT address group
The range of IP addresses in address pool 1
is from 202.110.10.10 to 202.110.10.15
vpn-instance
---
limit-flag
0
vpn-instance
---
limit-flag
0
to 202.110.10.15
2019