H3C MSR 20-20 Command Reference Manual page 2021

Msr 20/30/50 series routers
Hide thumbs Also See for MSR 20-20:
Table of Contents

Advertisement

View
Any view
Parameter
None
Description
Use the
parameters.
Example
# Display the configurations of all NAT parameters.
<Sysname> display nat all
NAT address-group information:
There are currently 1 nat address-group(s)
1 : from
NAT outbound information:
There are currently 2 nat outbound rule(s)
Server in private network information:
There are currently 1 internal server(s)
Interface:Ethernet1/0, Protocol:6(tcp),
[global]
NAT static information:
There are currently 2 static table(s)
192.168.1.111
NAT aging-time value information:
icmp ---- aging-time value is
pptp ---- aging-time value is
tcp-fin ---- aging-time value is
tcp-syn ---- aging-time value is
ftp-ctrl ---- aging-time value is
ftp-data ---- aging-time value is
NAT log information:
log enable
flow-begin
flow-active :
Table 525 Description on some fields of the display nat all command
Field
NAT address-group information
1 : from 202.110.10.10 to 202.110.10.15
NAT outbound information:
Ethernet1/0: ACL(2001) --- NAT address-group(1)
[no-pat]
Ethernet2/0: --- static
Server in private network information
command to display the configurations of all NAT
display nat all
202.110.10.10
Ethernet1/0: acl (2001) --- NAT address-group(1) [no-pat]
Ethernet2/0:
202.110.10.10:
GlobalAddr
InsideAddr
2.3.4.5
4.4.4.4
3.3.3.3
tcp ---- aging-time value is
udp ---- aging-time value is
dns ---- aging-time value is
:
enable acl 2000
:
enable
10(minutes)
to
202.110.10.15
--- static
8080
[local]
Vpn-instance
----
----
86400 (seconds)
300 (seconds)
60 (seconds)
86400 (seconds)
60 (seconds)
60 (seconds)
3600 (seconds)
7200 (seconds)
300 (seconds)
Description
NAT address pool information
The IP address range of address pool 1 is
from 202.110.10.10 to 202.110.10.15
Configuration information about internal
address-to-external address translation
On interface Ethernet 1/0, ACL 2001 is
associated with address pool 1 to provide
many-to-many address translation.
[no-pat] indicates that port address is not
translated.
Static NAT is configured on Ethernet 2/0.
Information of internal servers
2021
10.110.10.10:
80(www)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Msr 20-21Msr 30-16Msr 30-20Msr 30-40Msr 30-60Msr 50 ... Show all

Table of Contents