Certificate Request Url - H3C MSR 20-20 Command Reference Manual

View
Parameter
Description
Related command:
Example

certificate request url

Syntax
View
Parameter
Description
undo certificate request polling { count | interval }
PKI domain view
count: Maximum number of attempts to poll the status of the certificate request,
in the range 1 to 100.
minutes: Polling interval, in the range 5 to 168 minutes.
Use the
certificate request polling
polling interval and maximum number of attempts.
Use the
undo certificate request polling
By default, the polling is executed once every 20 minutes for up to 50 times.
After an applicant makes a certificate request, the CA may need a long period of
time if it verifies the certificate request manually. During this period, the applicant
needs to query the status of the request periodically to get the certificate as soon
as possible after the certificate is signed.
display pki certificate.
# Specify the polling interval as 15 minutes and the maximum number of attempts
as 40.
<Sysname> system-view
[Sysname] pki domain 1
[Sysname-pki-domain-1] certificate request polling interval 15
[Sysname-pki-domain-1] certificate request polling count 40
certificate request url url-string
undo certificate request url
PKI domain view
url-string: URL of the server for certificate request, a case-insensitive string of 1 to
127 characters. It comprises the location of the server and the location of CGI
command interface script in the format of http:
//server_location/ca_script_location, where server_location is generally expressed
in IP address.
Use the
certificate request url
that the device makes a certificate request through SCEP.
Use the
undo certificate request url
By default, no URL is specified for a PKI domain.
command to specify the certificate request
command to restore the defaults.
command to specify the URL of the RA server
command to remove the configuration.
2047