Userlog Nat Export Version; Userlog Nat Syslog - H3C MSR 20-20 Command Reference Manual

2042 C 133: NAT C
HAPTER

userlog nat export version

Syntax
View
Parameter
Description
Example

userlog nat syslog

Syntax
View
Parameter
Description
Example
C
ONFIGURATION OMMANDS
userlog nat export version version-number
undo userlog nat export version
System view
version-number: Version number of NAT logs. Currently, the system supports
version 1 only.
Use the
userlog nat export version
NAT logs.
Use the
undo userlog nat export version
By default, the version number of NAT logs is 1.
# Set the version number of NAT logs to 1.
<Sysname> system-view
[Sysname] userlog nat export version 1
userlog nat syslog
undo userlog nat syslog
System view
None
Use the
userlog nat syslog
center.
Use the undo userlog nat syslog
By default, NAT logs are exported to the NAT log server.
Note that as NAT logs may occupy large memory, it is not advisable to export large
amount of NAT logs to the information center.
# Export NAT logs to the information center.
<Sysname> system-view
[Sysname] userlog nat syslog
command to set the version number of
command to restore the default.
command to export NAT logs to the information
command to restore the default.