Ldap-Server; Locality - H3C MSR 20-20 Command Reference Manual

Parameter
Description
Example

ldap-server

Syntax
View
Parameter
Description
Example

locality

Syntax
View
ip-address: IP address for an entity.
Use the command to configure the IP address of an entity.
ip
Use the command to remove the configuration.
undo ip
By default, no IP address is specified for an entity.
# Configure the IP address of an entity as 11.0.0.1.
<Sysname> system-view
[Sysname] pki entity 1
[Sysname-pki-entity-1] ip 11.0.0.1
ldap-server ip ip-address [ port port-number ] [ version version-number ]
undo ldap-server
PKI domain view
ip-address: IP address of the LDAP server in dotted decimal format.
port-number: Port number of the LDAP server, in the range 1 to 65535. By default,
it is 389.
version-number: LDAP version number, either 2 or 3. By default, it is 2.
Use the command to specify an LDAP server for a PKI domain.
ldap-server
Use the undo ldap-server
By default, no LDAP server is specified for a PKI domain.
# Specify an LDAP server for PKI domain 1.
<Sysname> system-view
[Sysname] pki domain 1
[Sysname-pki-domain-1] ldap-server ip 169.254.0 30
locality locality-name
undo locality
PKI entity view
command to remove the configuration.
2055