Connection-Limit Enable; Connection-Limit Policy - H3C MSR 20-20 Command Reference Manual

2016 C 133: NAT C
HAPTER
Description
Example

connection-limit enable

Syntax
View
Parameter
Description
Example

connection-limit policy

Syntax
View
Parameter
C
ONFIGURATION OMMANDS
Use the connection-limit default amount
connections globally.
Use the
undo connection-limit default amount
default.
By default, the upper limit is 100 and the lower limit is 20.
# Configure the upper limit as 200 and lower limit as 50.
<Sysname> system-view
[Sysname] connection-limit default amount upper-limit 200 lower-limit 50
connection-limit enable
undo connection-limit enable
System view
None
Use the
connection-limit enable
function.
Use the
undo connection-limit enable
By default, the connection-limit function is disabled.
Once this function is enabled, both the connection number and the connection
rate are limited.
# Enable the connection-limit function.
<Sysname> system-view
[Sysname] connection-limit enable
connection-limit policy policy-number
undo connection-limit policy { policy-number | all }
System view
policy-number: Connection-limit policy number, in the range 0 to 19.
all: Deletes all connection-limit policies.
command to set the limit(s) of user
command to restore the
command to enable the connection-limit
command to disable this function.