2024
C
133: NAT C
HAPTER
Parameter
Description
Example
display nat outbound
Syntax
View
Parameter
Description
Example
C
ONFIGURATION
OMMANDS
None
Use the
display nat log
# View the NAT log configuration.
<Sysname> display nat log
NAT log information:
log enable
:
flow-begin
:
flow-active :
Table 527 Description on the fields of the display nat log command:
Field
NAT log information :
log enable : enable acl 2000
flow-begin : enable
flow-active : 10(minutes)
display nat outbound
Any view
None
Use the
display nat outbound
information.
# Display the NAT address translation information.
<Sysname> display nat outbound
NAT outbound information:
There are currently 2 nat outbound rule(s)
Table 528 Description on the fields of the display nat outbound command
Field
NAT outbound information:
Ethernet1/0: acl(2001) --- NAT
address-group(1) [no-pat]
Ethernet1/1: acl(2002) --- interface
command to view the NAT log configuration.
enable acl 2000
enable
10(minutes)
Description
NAT log configuration
Logging data flows matching acl 2000.
Logging newly established sessions
Interval in logging active flows (10 minutes)
command to display the address translation
Ethernet1/0: acl(2001) --- NAT address-group(1) [no-pat]
Ethernet1/1: acl(2002) --- interface
Description
Display configured NAT address translation
information
ACL 2001 is associated with address pool 1 on
interface Ethernet 1/0 to provide many-to-many
NAT. [no-pat] indicates that port address is not
translated.
ACL 2002 is associated with interface Ethernet 1/1
to implement Easy IP