Display Userlog Export; Limit Acl - H3C MSR 20-20 Command Reference Manual

display userlog export

Syntax
View
Parameter
Description
Related command:
Example

limit acl

Syntax
View
Parameter
Table 531 Description on the fields of the display nat statistics command
Field
total NO-PAT session table count
total SERVER session table count
total STATIC session table count
total FRAGMENT session table count
total session table count HASH by Internet side IP Number of HASH entries calculated based
active PAT session table count
active NO-PAT session table count
active FRAGMENT session table count
active session table count HASH by Internet side
IP
display userlog export
Any view
None
Use the
display userlog export
statistics of NAT logs for a card.
reset userlog export
# View the configuration and statistics of NAT logs.
<Sysname> display userlog export
NAT:
No ip userlog export is enabled
limit limit-id acl acl-number [ per-destination | per-service | per-source ] * amount
max-amount min-amount
undo limit limit-id
Connection-limit policy view
limit-id: ID for a rule in a connection-limit policy, an integer in the range 0 to 255.
acl-number: Number for an ACL, in the range 2,000 to 3,999. Only data flows
that match this ACL are limited.
Description
Number of No-PAT session entries
Number of SERVER session entries
Number of STATIC session entries
Number of FRAGRANT session entries
upon the external IP address
Number of active PAT session entries
Number of active No-PAT session entries
Number of active FRAGRANT session
entries
Number of active HASH entries calculated
based upon the external IP address
command to view the configuration and
2027