Statistics Enable (Ethernet Service Instance View); Statistics Enable (Tunnel Interface View) - H3C CR16000-F Command Reference Manual

statistics enable (Ethernet service instance view)

Use statistics enable to enable packet statistics for an Ethernet service instance.
Use undo statistics enable to disable packet statistics for an Ethernet service instance.
Syntax
statistics enable
undo statistics enable
Default
The packet statistics feature is disabled for an Ethernet service instance.
Views
Ethernet service instance view
Predefined user roles
network-admin
Usage guidelines
For this command to take effect, you must configure a frame match criterion for the Ethernet service
instance and map it to a VSI. If you modify the frame match criterion or VSI mapping, packet
statistics of the instance are cleared.
Examples
# Enable packet statistics for Ethernet service instance 200 on GigabitEthernet 3/1/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 3/1/1
[Sysname-GigabitEthernet3/1/1] service-instance 200
[Sysname-GigabitEthernet3/1/1-srv200] statistics enable
Related command
display l2vpn service-instance verbose
reset l2vpn statistics ac

statistics enable (tunnel interface view)

Use statistics enable to enable packet statistics for a manually created VXLAN or
VXLAN-DCI tunnel.
Use undo statistics enable to disable packet statistics for a manually created VXLAN or
VXLAN-DCI tunnel.
Syntax
statistics enable
undo statistics enable
Default
The packet statistics feature is disabled for a manually created VXLAN or VXLAN-DCI tunnel.
Views
VXLAN tunnel interface view
VXLAN-DCI tunnel interface view
25