Display Ripng Route - H3C S7500E Series Command Manual

Command Manual – IPv6 Routing
H3C S7500E Series Ethernet Switches
Table 2-3 Description on the fields of the display ripng interface command
Interface-name
Link Local Address
Split-horizon
Poison-reverse
MetricIn/MetricOut
Default route

2.1.6 display ripng route

Syntax
display ripng process-id route
View
Any view
Parameters
process-id: RIPng process ID, in the range of 1 to 65535.
Description
Use the display ripng route command to display all RIPng routes and timers
associated to each route of a RIPng process.
Examples
# Display the routing information of RIPng process 100.
<Sysname> display ripng 100 route
Route Flags: A - Aging, S - Suppressed, G - Garbage-collect
----------------------------------------------------------------
Field
Name of an interface running RIPng.
Link-local address of an interface running RIPng
Indicates whether the split horizon function is enabled (on:
Enabled off: Disabled).
Indicates whether the poison reverse function is enabled
(on: Enabled off: Disabled).
Additional metric to incoming and outgoing routes
Only/Originate:
advertises only default route. Originate means that the
default route and other RIPng routes are advertised.
Off, indicates that no default route is advertised or the
garbage-collect time expires after the default route
advertisement was disabled.
In
advertisement disabled, the interface advertises the
default route with metric 16 during the garbage-collect
time.
Chapter 2 IPv6 RIPng Configuration
Description
Only means
garbage-collect status:
2-6
Commands
that the interface
With default route