Display Rsa Peer-Public-Key - H3C s3100 series Command Manual

D0FC303F 51072D6C B5D0054D 3673EBA0 A4748984
5EBF6EBE CF6A13B1 C7858241 A2A9AA79
0203
010001
After the RSA key pair is generated, the display rsa local-key-pair public command displays two
public keys (the host public key and server public key) when the S3100-EI switch is working in
SSH1-compatible, but only one public key (the host public key) when the switch is working in SSH2
mode.

display rsa peer-public-key

Syntax
display rsa peer-public-key [ brief | name keyname ]
View
Any view
Parameters
brief: Displays brief information about the public keys of all SSH peers.
keyname: Specifies a key by its name, which is a string of 1 to 64 characters.
Description
Use the display rsa peer-public-key command to display information about the locally saved public
keys of all SSH peers. If no key name is specified, the command displays detailed information about the
locally saved public keys of all SSH peers.
Sometimes the public key modulo displayed with the display rsa peer-public-key command is one bit
smaller than the actual modulo. This is because the actually generated key pair is one bit smaller than
specified. For example, when you specify a 1024-bit key pair, the actually generated key pair may have
1024 or 1023 bits.
Examples
# Display brief information about all peer public keys.
<Sysname> display rsa peer-public-key brief
Type Module Name
---------------------------
1-5