Display Ospfv3 Peer Statistic - H3C S7500E Series Command Manual

Command Manual – IPv6 Routing
H3C S7500E Series Ethernet Switches
Table 3-8 Description on the fields of the display ospfv3 peer verbose command
Neighbor
interface address
In the area 0.0.0.2 via interface
vlan-interface 400
DR is 4.4.4.4 BDR is 3.3.3.3
Options is 0x000011 (-|R|-|-|-|V6)
Dead timer due in 00:00:35
Database Summary List
Link State Request List
Link State Retransmission List

3.1.11 display ospfv3 peer statistic

Syntax
display ospfv3 peer statistic
View
Any view
Parameters
None
Description
Use the display ospfv3 peer statistic command to display information about all
OSPFv3 neighbors on the router, that is, numbers of neighbors in different states.
Examples
# Display information about all OSPFv3 neighbors.
<Sysname> display ospfv3 peer statistic
----------------------------------------------------------------------
Area ID
0.0.0.0
Field
OSPFv3 Router with ID (1.1.1.1) (Process 1)
Neighbor Statistics
Down Init
0 0
3-14
Chapter 3 IPv6 OSPFv3 Configuration Commands
Description
Neighbor ID
Interface address
Interface VLAN-interface 400 belongs to
area 1.
DR is 4.4.4.4. BDR is 3.3.3.3
The option is 0x000011 (-|R|-|-|-|V6).
Dead timer due in 35 seconds
Number of LSAs sent in DD packet
Number of LSAs in the link state request list
Number of LSAs in the link state
retransmission list
2-way ExStar Exchange Loading
0 0 0
Full
0 1