Display Ospfv3 Lsdb - H3C S7500E Series Command Manual

Command Manual – IPv6 Routing
H3C S7500E Series Ethernet Switches
Hello due in 00:00:08
Neighbor Count is 1, Adjacent neighbor count is 1
Table 3-2 Description on the fields of the display ospfv3 interface command
Interface ID
IPv6 Prefixes
OSPFv3 Process
Area
Instance ID
Router ID
Network Type
Cost
Transmit Delay
State
Priority
Designated Router (ID)
Backup Designated Router (ID)
Interface Address
Timer interval configured, Hello: 10,
Dead: 40, Wait: 40, Retransmit: 5
Hello due in 00:00:08
Neighbor Count
Adjacent neighbor count

3.1.7 display ospfv3 lsdb

Syntax
display ospfv3 [ process-id ] lsdb [ [ external | inter-prefix | inter-router |
intra-prefix | link | network | router ] [ link-state-id ] [ originate-router router-id ] |
total ]
View
Any view
Chapter 3 IPv6 OSPFv3 Configuration Commands
Field
3-7
Description
Interface ID
IPv6 Prefix
OSPFv3 Process
Area ID
Instance ID
Router ID
Network type of the interface
Cost value of the interface
Transmission delay of the interface
Interface state
DR priority of the interface
ID of the designated router on this link
ID of the backup designated router on
this link
Interface address
Time intervals in seconds configured on
the interface, Hello: 10, Dead: 40, Wait:
40, Retransmit: 5
Hello packet will be sent in 8 seconds
Number of Neighbors on the interface
Number of Adjacencies on the interface