Display Ospf Lsdb - H3C s3600 series Command Manual

Field
Priority
Designated Router
Backup Designated Router
Timers
Transmit Delay

display ospf lsdb

Syntax
display ospf process-id area-id lsdb [ brief | [ [ asbr | network | nssa | router | summary ]
[ ip-address ] ] [ originate-router ip-address | self-originate ] ]
display ospf [ process-id ] lsdb [ brief | [ [ asbr | ase | network | nssa | router | summary ]
[ ip-address ] ] [ originate-router ip-address | self-originate ] ]
View
Any view
Parameters
process-id: OSPF Process ID. If you do not specify a process ID, this command applies to all current
OSPF processes.
area-id: OSPF area ID, which can be a decimal integer (ranging from 0 to 4294967295) or in the form of
an IP address.
brief: Displays brief database information.
asbr: Displays the database information about Type-4 LSAs (summary-Asbr-LSAs).
ase: Displays the database information about the Type-5 LSAs (AS-external-LSAs). This argument is
unavailable if you have provided a value for area-id.
network: Displays the database information about the Type-2 LSAs (network-LSAs).
nssa: Displays the database information about the Type-7 LSAs (NSSA-external-LSAs).
router: Displays the database information about the Type-1 LSAs (router-LSAs).
summary: Displays the database information about the Type-3 LSAs (summary-net-LSAs).
ip-address: Link state identifier (in the form of an IP address).
originate-router ip-address: Specifies the IP address of the router advertising the LSAs.
self-originate: Displays the database information about the LSAs generated by the local router
(self-originate LSAs).
Priority of DR for interface election
DR on the network in which the interface resides
BDR on the network in which the interface resides
OSPF timers, defined as follows:
Hello
Dead
Poll
Retransmit
Delay time of transmitting LSA
4-18
Description
Interval of hello packet
Interval of dead neighbors
Interval of poll
Interval of retransmitting LSA