8400 HighLine C | Reference manual
Commissioning
8400 commissioning wizard
3.5
8400 commissioning wizard
This function extension is supported by the »Engineer« from version 2.15 onwards!
The 8400 commissioning wizard provides for a guided commissioning of the controller
based on the Lenze setting of the parameters. Then, the parameter settings made can be
stored save against mains failure in the controller.
Note!
Take all the necessary safety precautions before you carry out the following
commissioning steps and switch the device on!
Safety instructions with regard to commissioning
How to carry out a guided commissioning with the »Engineer«:
1. In the Project view, select the 8400 HighLine controller.
2. Click the
Now, the commissioning wizard guides you step by step through the setting of the
essential parameters for quick commissioning.
Related topics:
Commissioning of the "Actuating drive speed" technology application
58
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
symbol to open the Commissioning wizard 8400.
L
( 54)
( 59)
Firmware ≤ 11.00 - DMS 6.0 EN - 10/2011