Parameter Change-Over - Lenze L-force HighLine C 8400 Series Reference Manual

8400 HighLine C | Reference manual

Parameter change-over

Internal interfaces | System block "LS_WriteParamList"
13 Parameter change-over
This function extension is only available from version 04.00.00!
For up to 32 freely selectable parameters, this basic function provides a change-over
between four sets with different parameter values.
The parameter list is created in the same way as the user menu is composed, namely by
means of parameterisation. In the »Engineer«, a user-friendly parameterisation dialog
with import and export functions is available for this purpose.
13.1 Internal interfaces | System block "LS_WriteParamList"
The LS_WriteParamList system block provides the internal interfaces for the basic
"Parameter change-over" function:
Inputs
Identifier
bExecute
bSelectWriteValue_1
bSelectWriteValue_2
694
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
Information/possible settings
Data type
FALSE TRUE If Execute Mode (C01082) = "0: by Execute":
Activate writing of the parameter list
BOOL
Binary coded selection of the value set 1 ... 4 to be used.
bSelectWrite bSelectWrite
BOOL
Value_1 Value_2
FALSE FALSE
TRUE FALSE
FALSE TRUE
TRUE TRUE
L
Value set 1 (C01086/1 ... n)
Value set 2 (C01087/1 ... n)
Value set 3 (C01088/1 ... n)
Value set 4 (C01089/1 ... n)
Firmware ≤ 11.00 - DMS 6.0 EN - 10/2011