Lenze L-force HighLine C 8400 Series Reference Manual page 127

Identifier
DIS code | data type
bInit
bSafeTorqueOff
bReady
bReadyToSwitchOn
bOperationEnable
bWarning
bTrouble
bFail
bCollectedFail
(from version 04.00.00)
bSafetyIsActive
bImpIsActive
bCInhIsActive
bCwCcw
bNactCompare
Option "Lock bFail at TroubleQSP"
The TroubleQSP
has been parameterised for the "TroubleQSP" error response. Since the bFail status output
is not set in this case, it is not recognisable after pulse inhibit due to e.g. automatic brake
operation (as well for a higher-level control), why the drive is standing und does not start
when the setpoint is selected. Only after an error reset, a setpoint is accepted again.
From version 11.00.00:
C00148, the bFail status output is also set to TRUE if the device status is TroubleQSP.
Firmware ≤ 11.00 - DMS 6.0 EN - 10/2011
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
Internal interfaces | "LS_DriveInterface" system block
Value/meaning
TRUE "Init" device state is active
BOOL
TRUE "SafeTorqueOff" device state is active
BOOL
TRUE "SwitchedOn" device state is active
BOOL
TRUE "ReadyToSwitchOn" device state is active
BOOL
TRUE "OperationEnabled" device state is active
BOOL
TRUE A warning is indicated
BOOL
TRUE "Trouble" device state is active
BOOL
TRUE "Fault" device state is active
BOOL
TRUE Group error: A device status according to the group error
configuration in
BOOL
the setpoint selection.
TRUE In preparation
BOOL
TRUE Pulse inhibit is active
BOOL
TRUE Controller inhibit is active
BOOL
FALSE Motor rotates in CW direction
BOOL
TRUE Motor rotates in CCW direction
TRUE During open-loop operation:
Speed setpoint < Comparison value (C00024)
BOOL
During closed-loop operation:
Actual speed value < Comparison value (C00024)
device status gets active as soon as a monitoring function responds that
If the "Lock bFail at TroubleQSP" option is activated (bit 14 = "1") in
L
8400 HighLine C | Reference manual
Device control (DCTRL)
C00148 has occurred, the drive is not able to follow
127