Drive Diagnostics With The "Engineer - Lenze L-force HighLine C 8400 Series Reference Manual

8400 HighLine C | Reference manual
Diagnostics & error management
Drive diagnostics with the »Engineer«
9.3 Drive diagnostics with the »Engineer«
When an online connection to the controller has been established, the connected
controller can be diagnosed and relevant actual controller states can be displayed in a
clearly arranged visualisation using the »Engineer«:
Button
Resetting an error
Logbook...
Monitoring...
Device status...
Drive control...
Device information...
562
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
Function
Display details of the status determining error.

Display details of the current error.

Display all active sources of a controller inhibit.

Display all active sources of a quick stop.

Acknowledge fault message (if the error cause has been eliminated).
Display the Logbook of the controller.
Configure the Monitoring.
Display the internal state machine including the current device status.
Display the bit assignment of the following control-related words:
• MCI control word (C00136/1)
• CAN control word (C00136/2)
• Cause of controller inhibit (C00158)
• Cause of quick stop (C00159)
• Status word (C00150)
• Status word 2 (C00155)
Display identification data, e.g. firmware information or serial number of individual
controller components.
L
( 568)
( 573)
Firmware ≤ 11.00 - DMS 6.0 EN - 10/2011