Lenze L-force HighLine C 8400 Series Reference Manual page 606

8400 HighLine C | Reference manual
Diagnostics & error management
Error messages of the operating system
Ck10: Implausible profile data [xx.0184.08007]
Response (Lenze setting printed in bold)
0: No Reaction
Cause
MCK: Implausible profile data are at hand.
Ck11: Invalid operating mode [xx.0184.08009]
Response (Lenze setting printed in bold)
0: No Reaction
Cause
MCK: The operating mode defined via the
wMckOperationMode input is not supported.
Ck12: Invalid profile number [xx.0184.08014]
Response (Lenze setting printed in bold)
0: No Reaction
Cause
MCK: The positioning profile number in the positioning
operating mode specified via the wPosProfileNo input is
invalid.
Ck13: Error - MCKCtrlInterface function block [xx.0184.08015]
Response (Lenze setting printed in bold)
0: No Reaction
Cause
MCK: An error has occurred in the
function block.
dH09: EEPROM power section [xx.0400.00009]
Response (Lenze setting printed in bold)
0: No Reaction
Cause
Device error
dH10: Fan failure [xx.0400.00016]
Response (Lenze setting printed in bold)
0: No Reaction
Cause
The device fan has failed.
Possible causes:
• The short-circuit check of the fan connection has
tripped.
• The speed monitoring of the fan has tripped.
606
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
1: Fault 2: Trouble 3: TroubleQuickStop
1: Fault 2: Trouble 3: TroubleQuickStop
1: Fault 2: Trouble 3: TroubleQuickStop
1: Fault 2: Trouble 3: TroubleQuickStop
L_MckCtrlInterface_1
1: Fault 2: Trouble 3: TroubleQuickStop
1: Fault 2: Trouble 3: TroubleQuickStop
L
Setting: C00595/10 ( Adjustable response)
4: WarningLocked 5: Warning 6: Information
Remedy
Check profile data set.
Setting: C00595/11 ( Adjustable response)
4: WarningLocked 5: Warning 6: Information
Remedy
Define a valid operating mode.
Setting: C00595/12 ( Adjustable response)
4: WarningLocked 5: Warning 6: Information
Remedy
Define a valid profile number.
Setting: C00595/13 ( Adjustable response)
4: WarningLocked 5: Warning 6: Information
Remedy
Check wiring and parameterisation of the
L_MckCtrlInterface_1 function block.
4: WarningLocked 5: Warning 6: Information
Remedy
Consultation with Lenze required.
Setting: C00566 ( Adjustable response)
4: WarningLocked 5: Warning 6: Information
Remedy
• Check the fan for short-circuit.
• Clean the fan.
Firmware ≤ 11.00 - DMS 6.0 EN - 10/2011