Lenze L-force HighLine C 8400 Series Reference Manual page 381

Inverter drives
Hide thumbs Also See for L-force HighLine C 8400 Series:
Table of Contents

Advertisement

Control word
Output words
Word 1 DriveControlStatus
Word 2 MotorSpeedAct
Word 3 MotorSpeedSet
Word 4 -
Word 5 ... 16 -
Status word
Firmware ≤ 11.00 - DMS 6.0 EN - 10/2011
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
Name
Bit 14 SetFail
Bit 15 SetSpeedCcw
Name
Name
Bit 0 FreeStatusBit0
Bit 1 PowerDisabled
Bit 2 FreeStatusBit2
Bit 3 FreeStatusBit3
Bit 4 FreeStatusBit4
Bit 5 FreeStatusBit5
Bit 6 ActSpeedIsZero
Bit 7 ControllerInhibit
Bit 8 StatusCodeBit0
Bit 9 StatusCodeBit1
Bit 10 StatusCodeBit2
Bit 11 StatusCodeBit3
Bit 12 Warning
Bit 13 Trouble
Bit 14 FreeStatusBit14
Bit 15 FreeStatusBit15
L
8400 HighLine C | Reference manual
TA "Actuating drive speed"
Function
1 ≡ Set error (trip set)
0 ≡ Direction of rotation to the right (Cw)
1 ≡ Direction of rotation to the left (Ccw)
Assignment
Status word
• See table below for bit assignment.
Actual speed value
• Scaling: 16384 ≡ 100 % reference speed (C00011)
Resulting overall setpoint
• Scaling: 16384 ≡ 100 % reference speed (C00011)
Not preconfigured
Not preconfigured
• Only available for control mode "40: MCI".
Status
Free status bit 0 (not assigned, freely assignable)
1 ≡ Inverter control inhibited (pulse inhibit is active)
Free status bit 2 (not assigned, freely assignable)
Free status bit 3 (not assigned, freely assignable)
Free status bit 4 (not assigned, freely assignable)
Free status bit 5 (not assigned, freely assignable)
During open-loop operation:
1 ≡ Speed setpoint < Comparison value (C00024)
During closed-loop operation:
1 ≡ Actual speed value < Comparison value (C00024)
1 ≡ Controller inhibited (controller inhibit is active)
Bit coded display of the active device status
Device state machine and device statuses
1 ≡ A warning is indicated
1 ≡ Controller is in the "Trouble" device status
• E.g. if an overvoltage has occurred.
Free status bit 14 (not assigned, freely assignable)
Free status bit 15 (not assigned, freely assignable)
Technology applications
(see table [4-1])
381

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

L-force highline e84avhc series

Table of Contents