Preconditions For Commissioning With The "Engineer - Lenze L-force HighLine C 8400 Series Reference Manual

8400 HighLine C | Reference manual
Commissioning
Preconditions for commissioning with the »Engineer«
3.3 Preconditions for commissioning with the »Engineer«
For commissioning, you need
a PC that satisfies the following requirements:
– processor with 1.4 GHz or higher
– at least 512MB RAM and 650 MB free hard disc space
– Microsoft® Windows® 2000 operating system (from service pack 2 onwards) or
Windows® XP
the Lenze »Engineer« PC software
a connection to the controller, e.g. via a USB diagnostic adapter:
– connect the USB diagnostic adapter to the X6 diagnostic interface.
– establish a connection between the USB diagnostic adapter and the PC via a free USB
port.
How to obtain/update the L-force »Engineer« software:
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
Download from the Internet:
The full version of the »Engineer StateLevel« is provided free of charge. Current
software can be found on the Internet in the "Services & Downloads" area under Lenze
website.
• Requesting the CD
You can also request the L-force »Engineer« separately on CD free of charge at
your Lenze representative. See the "About Lenze" area on our homepage for e.g.
the corresponding German address.
.