Lenze L-force HighLine C 8400 Series Reference Manual page 795

C00469
Parameter | Name:
C00469 | Keypad: STOP key function
Selection of the function for the STOP key on the keypad
Selection list
(Lenze setting printed in bold)
Read access
C00470
Parameter | Name:
C00470 | LS_ParFree_b
The LS_ParFree_b
Selection list
Subcodes
C00470/1
C00470/...
C00470/32
Read access
C00471
Parameter | Name:
C00471 | LS_ParFree
The LS_ParFree
Setting range
(min. hex value | max. hex value)
0x0000
Value is bit-coded:
Bit 0 Bit0
Bit 15 Bit15
Subcodes
C00471/1
C00471/...
C00471/32
Read access
Firmware ≤ 11.00 - DMS 6.0 EN - 10/2011
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
0 No function
1 Inhibit controller
2 Activate quick stop
Write access CINH PLC STOP
SB: Setting of the signal level to be output
0 False
1 TRUE
Lenze setting
0: FALSE
Write access CINH PLC STOP
SB: Setting of the words to be output
... ...
Lenze setting
0
Write access CINH PLC STOP
L
8400 HighLine C | Reference manual
Info
STOP key does not have any function
STOP key sets controller inhibit in the drive
STOP key sets quick stop in the drive
No transfer COM MOT Scaling factor: 1
Info
Signal level for output bPar1 ... bPar32
No transfer COM MOT Scaling factor: 1
0xFFFF
Info
Value for output wPar1 ... wPar32
No transfer COM MOT
Parameter reference
Parameter list | C00469
Data type: INTEGER_32
Index: 24106 = 5E2A
d h
Data type: UNSIGNED_8
Index: 24105 = 5E29
d h
Data type: UNSIGNED_16
Index: 24104 = 5E28
d h
795