Lenze L-force HighLine C 8400 Series Reference Manual page 357

Possibility 3: Change terminal assignment with the FB editor
Procedure:
1. Go to the FB Editor tab.
2. Delete the existing interconnection from LS_DigitalInput.bIn2 to LA_NCtrl.bJogSpeed2:
3. Establish a new interconnection from LS_DigitalInput.bIn2 to LA_NCtrl.bJogRamp1:

Tip!
You can find detailed information on how to use the FB editor of the »Engineer« in
the main chapter entitled
Firmware ≤ 11.00 - DMS 6.0 EN - 10/2011
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
8400 HighLine C | Reference manual
User-defined terminal assignment
"Working with the FB Editor".
L
I/O terminals
( 1009)
357