Application Example: "Position Measurement - Lenze L-force HighLine C 8400 Series Reference Manual

6.4.2.1

Application example: "Position measurement"

The touch probe function can be combined with the
measurement. This FB is able to save position signals to a ring buffer and detect differences
between two position signals.
In the wiring below, digital input DI3 is used to connect the touch probe sensor. For the
sake of clarity, irrelevant inputs and outputs of the
 Delta position between two touch probes
[6-5] Wiring for position measurement
Firmware ≤ 11.00 - DMS 6.0 EN - 10/2011
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
8400 HighLine C | Reference manual
LS_TouchProbe
L
I/O terminals
Touch probe detection
L_Odometer FB for a position
SB are masked out.
349