Lenze L-force HighLine C 8400 Series Reference Manual page 505

Mode 14: >_Mlim
Mode 14
Lp
Ln
Functional sequence:
1. Movement in a positive direction with reduced torque and start profile data set.
2. The reference is set if it is detected that the torque limit set in
beyond the time set in
– If a home value offset has not been set, this position is the home position.
– If a home value offset has been set, correctly signed traversing by this offset takes
place and the home position is set at the end of this travel distance.

Tip!
Set a home value offset in
Effective torque limit
[8-18] Wiring for torque limit when homing to "Positive stop" (homing modes 14/15)
Firmware ≤ 11.00 - DMS 6.0 EN - 10/2011
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
> Mlim
Start speed
Active Active
Inactive Inactive
C01223 ("Homing to positive stop").
C01227/1
L
8400 HighLine C | Reference manual
Basic drive functions (MCK)
1
Offset path Sequence profile (optional)
Active
Active
C01222
to avoid stopping at the positive stop.
Homing
Profile speed
Active
Active
is exceeded
505