Lenze L-force HighLine C 8400 Series Reference Manual page 334

8400 HighLine C | Reference manual
I/O terminals
Analog terminals
Parameterisation dialog in the »Engineer«:
Button
Short overview of parameters for the analog terminals:
Parameter
Analog input 1
C00028/1
C00029/1
C00033/1
Analog input 2
C00028/2
C00029/2
C00033/2
Highlighted in grey = display parameter
334
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
Function
Parameterising analog input ( 336)
Parameterising analog output ( 340)
Open the parameterising dialog for assigning application inputs to the analog input.
Changing the terminal assignment with the »Engineer« ( 355)
Info
AIN1: Input voltage
AIN1: Input current
AIN1: Output value (to application)
AIN2: Input voltage
AIN2: Input current
AIN2: Output value (to application)
L
Lenze setting
Value Unit
- V
- mA
- %
- V
- mA
- %
Firmware ≤ 11.00 - DMS 6.0 EN - 10/2011