Lenze L-force HighLine C 8400 Series Reference Manual page 960

8400 HighLine C | Reference manual
Parameter reference
Parameter list | C01501
C01501
Parameter | Name:
C01501 | Resp. to communication error with MCI
Configuration of monitoring functions for the communication module
Selection list
Subcodes
C01501/1
C01501/2
Read access
C01670
Parameter | Name:
C01670 | L_ComparePhi 1-5: Function
Selection of comparison operation
• If the statement of the selected comparison operation is true, the binary bOut output will be set to TRUE.
Selection list
Subcodes
C01670/1
C01670/2
C01670/3
C01670/4
C01670/5
Read access
960
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
0 No Reaction
1 Fault
2 Trouble
3 TroubleQuickStop
4 WarningLocked
5 Warning
6 Information
Lenze setting
0: No Reaction
0: No Reaction
Write access CINH PLC STOP
1 In1 = In2
2 In1 > In2
3 In1 < In2
4 |In1| = |In2|
5 |In1| > |In2|
6 |In1| < |In2|
Lenze setting
1: In1 = In2
1: In1 = In2
1: In1 = In2
1: In1 = In2
1: In1 = In2
Write access CINH PLC STOP
L
Info
Resp. to MCI connection error
• Response to a communication error of the attached
communication module.
Resp. to MCI invalid module
• Response to an unplugged or incompatible
communication module
No transfer COM MOT Scaling factor: 1
Info
L_ComparePhi_1: Function
L_ComparePhi_2: Function
L_ComparePhi_3: Function
L_ComparePhi_4: Function
L_ComparePhi_5: Function
No transfer COM MOT Scaling factor: 1
Firmware ≤ 11.00 - DMS 6.0 EN - 10/2011
Data type: UNSIGNED_8
Index: 23074 = 5A22
d h
Data type: UNSIGNED_8
Index: 22905 = 5979
d h