Parameterising The Motor Control - Lenze L-force HighLine C 8400 Series Reference Manual

3.7.3

Parameterising the motor control

1. Go to Workspace and change to the Application parameters tab.
– The motor control parameters, among other things, can be found on the left:
2. In the
Related topics:
Notes on motor control
Motor control (MCTRL)
Firmware ≤ 11.00 - DMS 6.0 EN - 10/2011
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
Commissioning of the "Table positioning" technology application
Motor control list field (C00006), select the desired motor control.
( 55)
( 131)
L
8400 HighLine C | Reference manual
Commissioning
71