Selecting The Control Mode - Lenze L-force HighLine C 8400 Series Reference Manual

8400 HighLine C | Reference manual
Motor control (MCTRL)

Selecting the control mode

5.2 Selecting the control mode
The 8400 HighLine controller supports various modes for motor control (open loop or
closed loop).
 V/f characteristic control (VFCplus) with linear characteristic for asynchronous motors
is preset.
 The control mode can be selected in the »Engineer« on the Application parameter tab
via the Motor control (C00006) list field:
 A click on the Motor control... button leads you to the parameterisation dialog of the
selected motor control. (The button is labelled according to the selected motor control.)

Tip!
In order to make the selection of the motor control easier, we provide a selection
help with recommendations and alternatives for standard applications in the
subchapter entitled
The following section briefly describe the control modes. A reference to more details can
be found at the end of each section.
142
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
"Selection help".
( 146)
L
Firmware ≤ 11.00 - DMS 6.0 EN - 10/2011