Configuring Exception Handling Of The Output Terminals - Lenze L-force HighLine C 8400 Series Reference Manual

8400 HighLine C | Reference manual
I/O terminals

Configuring exception handling of the output terminals

6.5 Configuring exception handling of the output terminals
This function extension is only available from version 04.00.00!
Exception handling for the analog and digital output terminals in the event of an error can
be set via decoupling configuration and decoupling values.
 Bit coded selection is carried out in
the events that will trigger decoupling.
 Bit coded selection is carried out in
the events that will trigger decoupling.
Bit
Bit 0
Bit 1
Bit 2
Bit 3
Bit 4
Bit 5
Bit 6
Bit 7
Bit 8
Bit 9
Bit 10
Bit 11
Bit 12
Bit 13
Bit 14
Bit 15
Finally, the following parameters define the value/status that the output terminals are to
have when they are decoupled:
Parameter
C00442/1
C00442/2
C00442/3
C00442/4
C00448
Related topics:
Configuring exception handling of the CAN PDOs
350
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
C00441
C00447
Event
SafeTorqueOff
ReadyToSwitchOn
SwitchedOn
Reserved
Trouble
Fault
Reserved
Reserved
Reserved
Fail CAN_Management
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Info
AOut1_U: Decoupling value
AOut2_U: Decoupling value
AOut1_I: Decoupling value
AOut2_I: Decoupling value
DigOut decoupling value
L
for the analog output terminals, defining
for the digital output terminals, defining
Lenze setting
Value Unit
0.00 %
0.00 %
0.00 %
0.00 %
Bit coded
( 641)
Firmware ≤ 11.00 - DMS 6.0 EN - 10/2011