Configuring The List Using The "Engineer" Parameterisation Dialog - Lenze L-force HighLine C 8400 Series Reference Manual

8400 HighLine C | Reference manual
Parameter change-over
Configuring the list using the »Engineer« parameterisation dialog
13.2 Configuring the list using the »Engineer« parameterisation dialog

Proceed as follows to open the dialog for parameterising the parameter change-
over:
1. »Engineer« Go to the Project view and select the 8400 HighLine controller.
2. Go to Workspace and change to the Application parameters tab.
3. Go to the Overview dialog level and click the "basic functions" button.
4. Go to the Overview  Basic functions dialog box and click the Parameter change-
over button.
696
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
L
Firmware ≤ 11.00 - DMS 6.0 EN - 10/2011